Hoist Zone Manufacturer

Manufacturer Warranty

Hoist Zone Powered


Hoist Zone USA

Made in the USA

Hoist Zone Speed

Single Speed

Hoist Zone Durable


Coffing JLC Electric Chain Hoist


  • 1/8 to 2 Ton
  • Single Phase and 3 Phase
  • Max Lifting Speed 32 FPM
  • 10’–20′ Lift
Compact in size but big on features, the Coffing JLC Electric Chain Hoist is engineered and built for the heavy-duty demands of all of your industrial needs.

Compact in Size, Big on Features

The Coffing JLC Electric Chain Hoist is engineered and built for the heavy-duty demands of all of your industrial needs. The Coffing JLC Electric Chain Hoist features a multiple disc motor brake, overload clutch, and chain end stop for your safety.

Standard Lifts

  • 10’, 15’. 20’ Standard Lifts
  • Standard Push Button Drop is 4 feet less than lift
  • CSA Approved


  • Single Phase – 115/230
  • Three Phase – 230/460, 208, 380, 415, 575
  • 60 Hertz Standard (50 Hertz Available)

Easy Access for Maintenance

The panel plate’s location gives you easy access to controls and motor leads for changing the voltage on the dual-voltage motors or when servicing the hoist. The connection wires are numbered to assist with easy maintenance.

Heavy-Duty Motor Brake

Multiple disc motor brake with direct acting design provides you with positive load spotting and holding.

Smoother Lifting & Reduced Chain Wear

The 5-pocket load sheave increase chain and sheave engagement by 25% when compared to hoists with a conventional 4-pocket sheave.

Adjustable Limit Switches

It’s now easier than ever to regulate upper and lower load travel. Brass nuts are the standard for improved switch setting and repeatability. The stainless steel limit switch is standard for the Coffing JLC Electric Chain Hoist.

Guards Against Unsafe Loading

Protect your hoist, operator, and supporting structures from damaging overloads, chain jamming, and reverse phasing with the mechanical overload protection device.

Longer & Quieter Operation

The oil bath transmission and precision machined alloy steel gears gives you longer and quieter operation.

Nema 3R Push Button Station

The pendant’s ergonomic design fits your hand for thumb or two-handed operation. 24V Control for your safety. 115V Control is available upon request.

Compact Aluminum Frame

Housing designed for portability and ease of installation.

Durable Chain Container

The chain container is standard on lifts up to 20 ft. single chain and 10 ft. double chain.


  • Variable Frequency Drive (Only Available in the U.S.)
  • Lifetime Warranty
  • Made in the USA

Looking for a replacement pendant?

Weight 65 lbs
Dimensions 23 × 15 × 23 in

Country of Origin



208-3-60, 115-1-60, 230-1-60, 208–230-3-60, 460-3-60


There are no reviews yet.

Be the first to review “Coffing JLC Electric Chain Hoist”

Your email address will not be published. Required fields are marked *

Frequently Asked Questions

What do I do if my hoist doesn’t work?

Hoist Zone offers support Monday — Friday 6:00 AM — 3:00 PM EST. Contact our service team by phone (574) 742-1185 or email us at info@hoistzone.com

How do I perform a hook inspection?

Examine hooks for the following:

  • Missing or illegible hook manufacturer’s identification or secondary manufacturer’s identification
  • Missing or illegible rated load identification
  • Excessive pitting or corrosion
  • Cracks, nicks, or gouges
  • Wear—any wear exceeding 10% (or as recommended by the manufacturer) of the original section dimension of the hook or its load pin
  • Deformation—any visible apparent bend or twist from the plane of the unbent hook
  • Throat opening—any distortion causing an increase in throat opening of 5% not to exceed 1/4” (6mm), or as recommended by the manufacturer
  • Inability to lock—any self-locking hook that does not lock
  • Inoperative latch (if provided)—any damaged latch or malfunctioning latch that not close the hook’s throat
  • Damaged, missing, or malfunctioning hook attachment and securing means
  • Thread wear, damage, or corrosion
  • Evidence of heat exposure or unauthorized welding
  • Evidence of unauthorized alterations such as drilling, machining, grinding, or other modifications

If signs of any of those listed above are visually apparent, then use of said hook is mandated to be out of service until proper repair by qualified personnel has been performed.

How often should I perform a hook inspection?

In order to ensure your safety, the ASME requires hooks to be periodically inspected once a month. If a professional recommends even more often, then this supersedes the periodic monthly inspection.

Related Products