CM Chain Sling: The Ultimate Customizable Sling
The CM chain sling can handle all of your lifting needs with a working load limit of 4,300 lbs (⁹/₃₂" chain) and 8,800 lbs (⅜" chain). Grade 100.
You can customize everything about your CM chain sling including:
- Chain Thickness
- Number of Legs
- Length of Chain
- Hook Adjusters
- Hook Style
All of these options allow you to get the exact chain sling you need for the price you want.
Worried your chain sling will get damaged? Don't worry. Hoist Zone makes it easy to order affordable replacement parts, and it comes with a lifetime guarantee.
Compatible with all Hoist Zone hoists.
How Much Can My Chain Sling Lift?
|
||
|---|---|---|
| Capacity/WLL at 90° | ||
| 9/32" | 4,300 lbs | |
| 3/8" | 8,800 lbs |
WLL vs SWL
WLL refers to the Working Load Limit. This term has replaced SWL.
|
|
|
|
|---|---|---|---|
| Capacity/WLL at 60° | Capacity/WLL at 45° | Capacity/WLL at 30° | |
| 9/32" | 7,400 lbs | 6,100 lbs | 4,300 lbs |
| 3/8" | 15,200 lbs | 12,400 lbs | 8,800 lbs |
|
|
|
|
|
|---|---|---|---|
| Capacity/WLL at 60° | Capacity/WLL at 45° | Capacity/WLL at 30° | |
| 9/32" | 11,200 lbs | 9,100 lbs | 6,400 lbs |
| 3/8" | 22,900 lbs | 18,700 lbs | 13,200 lbs |
|
|
|
|
|
|---|---|---|---|
| Capacity/WLL at 60° | Capacity/WLL at 45° | Capacity/WLL at 30° | |
| 9/32" | 11,200 lbs | 9,100 lbs | 6,400 lbs |
| 3/8" | 22,900 lbs | 18,700 lbs | 13,200 lbs |
What's the difference between a Sling Hook and a Grab Hook?
Hoist Zone offers two different hook styles when you buy a CM Chain Sling. You can either choose the grab hook or the sling hook. The hook style that is right for you depends on the application. If you are looking for a more economical hook that is specifically designed for chain rigging, then you should choose the grab hook. However, if you will be using a variety of chains, slings, and straps to do your lifting; then the sling hook would be your best option. The sling hook also comes with a built in safety latch to ensure an optimal lift.
How often should I perform a hook inspection?
In order to ensure your safety, the ASME requires hooks to be periodically inspected once a month. If a professional recommends even more often, then this supersedes the periodic monthly inspection.
How do I perform a hook inspection?
Examine hooks for the following:
- Missing or illegible hook manufacturer's identification or secondary manufacturer's identification
- Missing or illegible rated load identification
- Excessive pitting or corrosion
- Cracks, nicks, or gouges
- Wear—any wear exceeding 10% (or as recommended by the manufacturer) of the original section dimension of the hook or its load pin
- Deformation—any visible apparent bend or twist from the plane of the unbent hook
- Throat opening—any distortion causing an increase in throat opening of 5% not to exceed 1/4" (6mm), or as recommended by the manufacturer
- Inability to lock—any self-locking hook that does not lock
- Inoperative latch (if provided)—any damaged latch or malfunctioning latch that not close the hook's throat
- Damaged, missing, or malfunctioning hook attachment and securing means
- Thread wear, damage, or corrosion
- Evidence of heat exposure or unauthorized welding
- Evidence of unauthorized alterations such as drilling, machining, grinding, or other modifications
If signs of any of those listed above are visually apparent, then use of said hook is mandated to be out of service until proper repair by qualified personnel has been performed.
Reviews
There are no reviews yet.